 |
 |
 |
 |
 |
 |
  |
|
|
| Stator Can be replaced independent of rotor and is held in place with corrosion-resistant stainless steel bolts for easy maintenance. |
| Pinion gear Integral with motor shaft. |
| 25° tooth angle Provides 40% greater load capacity and wear resistance than other manufacturers' 14° tooth angles. |
| Double output shaft seals |
| Built-in crop guard over U-joint Prevents crop wrapping in or near oil seals. |
| Case-hardened steel helical gears More teeth in mesh at all times for smoother power transmission. Gears require fewer reductions, fewer gears, fewer shafts and bearings. Fewer reductions also mean greater operating efficiency. |
| Drain plug Easily accessible, extra large. |
| Finned aluminum housing For cool-running efficiency. Operates at temperatures 20°F (11°C) lower than comparable motors with steel housing, because the Valley aluminum housing and fins dissipate heat more effectively. This doubles insulation life and increases motor life. |
| Exclusive junction box seal and internal vent Keeps motor lead connections dry. |
| Extra-large motor bearing For reliable motor performance. |
| Large 1 3/16" motor shaft |
|
|
|||||||||
|
|
Center Drive
  
|
